|
 |
| |
| |
Reinforced Rubber Bushing
 Hardness is 150% higher than OE rubber bushings. |
| Solid steering response and driving suspension feel. |
| Resist side inclined while cornering at high speed maneuvers. |
| Made with high strength and anti-crack rubber material. |
| Viscosity between rubber and metal is about 2000KGS. |
Anti-Dust Pillow Ball Bushing
| Handling control and responsive steering is superior than harden rubber bush. |
| Excellent driver feedback, precise control and solid suspension feel. |
| Inner bushing is made accurately with both high molecule plastic tube and specific metal alloy. |
| High Durability and reliability. |
Outer bushing is combined by TPV material anti-dust boot, 100% resistant from dust, water and oil,
extend the life of the budhing. |
Upgrade Suspension (Camber Kits)
Stage I / Street Racing (Reinforced Rubber Bushing)
Stage II / Drifting (Anti-Dust Pillow Ball Bushing)
| Control arm is made by high density steel. |
| Collocation with hardened rubber bushing (street racing) or anti-dust pillow ball bushing (drifting). |
| Provide advanced stability during high speed driving or hard cornering. |
| Immediately response from driver's steering control under acceleration. |
Adjustable links are assembled with WAVE WASHERS between nuts and bolts, which enable both of
them can tight more harder, won't come loosen or back off. |
In additional, WAVE WASHERS allow many times loosen and tighten again, unlike competitor's
products are difficult to loosen or tighten while doing the next alignment in the future. |
Reinforced Engine Mount
| Hardness rubber mounts create more strength than OE rubber mounts. |
| Immediately experience the feedback from engine acceleration. |
| Reduce engine movement significantly. |
| Provide the maximum output under engine acceleration. |
| Compound with high anti-vibration and durometer rubber material. |
Reinforced Steering & Stabilizer Kits
Reinforced Steering & Stabilizer Kits
| Made of state of art material THERMOPLASTIC, unlike polyurethane material as easy broken. |
| Resistant to oil, alkali and ozone, self-lubricating, resilient, high strength and hardness. |
| Combining the benefits of two key materials: strength from plastic and compression from rubber. |
| Withstand severe weather conditions, and will not brittle, crack or discolor with age. |
| Temperature range: -40°C ~ 100°C. |
| Crack or brittle from OE rubber or polyurethane bushes is solved by THERMOPLASTIC. |
Reinforced Stabilizer Link
Precision assembly production enables spheroid, self-lubricating plastic bearing and bracket has a tight
joint, provides consistence quality and longer life. Unlike any other traditional ball joint are easily to
loosen after installed for a period. |
Reinforced Radiator Hose Kits
Compound by both EPDM material and two Layun mesh layer woven. Double wrapped provide high
endurance and reliability. |
| Double layer pressure bearing 10kg / 1cm2, 150% stronger than OE rubber hose. |
Never worry about the high temperature or pressure will broken your upgrade radiator hose during high
turning or long time driving. |
 |
|
|
| |
|
