For Civic 06- FN2
Bushing Included
Harden Rubber Equipped. 2 PCS/SET
Aluminum/Forged
Tubular Type
Pillow Ball Equipped
Stab. Link Included
* #7214 Compatible
6 PCS/SET
Tubular Type
Harden Rubber Equipped
Stab. Link Included
* #7214 Compatible
6 PCS/SET
Pillow Ball Front Side + Shock Bushing
Harden Rubber Compliance Bushing
2 PCS/SET
*For JDM / SI USDM use
Harden Rubber Equipped
2 PCS/SET
OE Style/Blue
Compliance Bushing Included
*For JDM / SI USDM use
Harden Rubber Equipped
2PCS/SET
OE Style/Black
Compliance Bushing Included
*For JDM / SI USDM use
Caster Adjustment Range: +0°~2.5°
* Civic EK '96-00: For USDM EJ6/7/8 Use Only
32 PCS/SET
Caster Adjustment Range: +0°~2.5°
* Civic EK '96-00: For USDM EJ6/7/8 Use Only
32 PCS/SET
Camber Kit
Adjustment Range: -4 degrees plus
Harden Rubber Equipped
2 PCS/SET
*For Extreme Camber Use Only
Camber Kit
Adjustment Range: -4 degrees plus
Harden Rubber Equipped
2 PCS/SET
*For Extreme Camber Use Only
Aluminum / USDM
20mm extended
Harden Rubber Equipped
Shock Bushing: 40mm
2PCS/SET
*For Extreme Camber Use Only
2 PCS/SET
Extreme Low Use
* 25mm Shorter Design
* 0.5kg Lighter than OE One/Per Side
* Not Compatible Wth RC Ball Joints
*For JDM / SI USDM use
Alumunum
25mm Shorter Design
2 PCS/SET
* Extreme Low Use
* 0.5kg Lighter than OE per side
* Not compatible with RC Ball Joints
* Civic/CR-X EF: For EG shock conversion only
Alumunum
25mm Shorter Design
2 PCS/SET
* Extreme Low Use
* 0.5kg Lighter than OE per side
* Not compatible with RC Ball Joints
* Civic/CR-X EF: For EG shock conversion only
5 PCS/SET
Direct bolt-on Parts is COMPATIBLE
with these anti rear sway bars:
* HARDRACE 25.4mm hollow bar
* Mugen 26mm swaybar
* OEM Integra/Civic Type R 22-23mm sway bar
* For EG4/EG6/EG9/DC2 Use
* For RHD Models
* Not for ABS-equipped models
1 PCS/SET
* For EK4 Use
* For RHD Models
* Not for ABS-equipped models
1 PCS/SET
Compliance Bushing: 14mm
Harden Rubber Equipped
4 PCS/SET
* Not For '14-15 SI 'Use
Compliance Bushing: 16mm
Harden Rubber Equipped
4 PCS/SET
* For '14-15 SI 'Use
Harden Rubber Equipped
JDM
For 2-bush type rear lower arms & eyelet type shocks
26 PCS/SET
Harden Rubber Equipped
USDM
For 3-bush type rear lower arms & fork type shocks
28 PCS/SET
Harden Rubber Equipped
CAMBER-0.5°, CASTER+0.5°
6 PCS/SET
Pillow Ball Equipped
2 PCS/SET
Offset Bushing
Increase Caster
*Not compatible with #Q0098 & #Q0137
Harden Rubber Equipped
4 PCS/SET
Offset Function
Camber + Caster Adjustment
Pillow Ball Equipped
Oilless Bearing
* EK: For USDM EJ6/7/8 Use Only
* EK: Not For SI EM1 Use
2 PCS/SET
Pillow Ball Equipped
Oilless Bearing
* EK: For USDM EJ6/7/8 Use Only
* EK: Not For SI EM1 Use
2 PCS/SET
CRV 3rd & 4th: For 2.0/2.4 Use
CRV 5th: For 1.5T/2.4 CVT Use
Civic 8th: For FN2 Type-R Use
Civic 9th: For 2.4 SI Use
1PC/SET
CRV 3rd & 4th: For 2.0/2.4 Use
CRV 5th: For 1.5T/2.4 CVT Use
Civic 8th: For FN2 Type-R Use
Civic 9th: For 2.4 SI Use
1PC/SET
" Civic '92-96 or Integra '94-01 subframe swap required
3 MOUNTS/SET
* For Accord '03-07/ TSX '04-08 Manual Transmission
3 MOUNTS/SET
* For Accord '03-07/ TSX '04-08 Manual Transmission
" Civic '92-96 or Integra '94-01 Subframe Swap Required
3 MOUNTS/SET
For 36mm (Nut Size) Axle Use
PCD: 4Hx100 With Extended Wheel Studs
Bearing ID=43mm/OD=79mm (Made in Japan)
4PCS/SET
*Civic EG/EK:
-Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors).
-Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).
For 36mm (Nut Size) Axle Use
PCD: 4Hx100 With Extended Wheel Studs
Bearing ID=43mm/OD=79mm (Made in Japan)
4PCS/SET
*Civic EG/EK:
-Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors).
-Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).
For 36mm (Nut Size) Axle Use
PCD: 4Hx100 With Extended Wheel Studs
2PCS/SET
*Civic EG/EK:
-Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors).
-Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).
For 36mm (Nut Size) Axle Use
PCD: 4Hx100 With Extended Wheel Studs
2PCS/SET
*Civic EG/EK:
-Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors).
-Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).
Made in Japan
ID=43mm/OD=79mm
2 PCS/SET
*Civic EG/EK: Fits 79mm knuckles Only
Made in Japan
ID=43mm/OD=79mm
2 PCS/SET
*Civic EG/EK: Fits 79mm knuckles Only
Suitable For Lowered Cars
* Only compatible with Hardrace tie rod #6988 & #7840
2 PCS/SET
Inverted Installation
Suitable For Lowered Cars
* Not compatible with Hardrace tie rod #6988
2 PCS/SET
4 PCS/SET
Including Hard Tie Rod
Upside Down Installation
*For Track & More Than 2-inch lowered Use Only
2 PCS/SET
Upside Down Installation
*For Track & More Than 2-inch lowered Use Only
2 PCS/SET
Upside Down Installation
*For Track & More Than 2-inch lowered Use Only
2 PCS/SET
Upside Down Installation
*For Track & More Than 2-inch lowered Use Only
OE Replacement
M14 Ball Stud
* Civic 10th: For US Spec Only
* CR-V 5th: For US Spec Only
* Civic 11th: Not For China Spec
2 PCS/SET
OE Replacement
M14 Ball Stud
* Civic 10th: For US Spec Only
* CR-V 5th: For US Spec Only
* Civic 11th: Not For China Spec
2 PCS/SET
OE Replacement
M12 Ball Stud
* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only
2 PCS/SET
OE Replacement
M12 Ball Stud
* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only
2 PCS/SET
Adjustable - Camber -0.5°~+1.5°
M14 Ball Stud
* Civic 10th: For US Spec Only
* CR-V 5th: For US Spec Only
* Civic 11th: Not For China Spec
2 PCS/SET
Adjustable - Camber -0.5°~+1.5°
M14 Ball Stud
* Civic 10th: For US Spec Only
* CR-V 5th: For US Spec Only
* Civic 11th: Not For China Spec
2 PCS/SET
Adjustable - Camber -0.5°~+1.5°
M12 Ball Stud
* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only
2 PCS/SET
Adjustable - Camber -0.5°~+1.5°
M12 Ball Stud
* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only
2 PCS/SET
Adjustable - Camber -1.5°~+0.5°
M14 Ball Stud
* Civic 10th: For US Spec Only
* CR-V 5th: For US Spec Only
* Civic 11th: Not For China Spec
2 PCS/SET
Adjustable - Camber -1.5°~+0.5°
M14 Ball Stud
* Civic 10th: For US Spec Only
* CR-V 5th: For US Spec Only
* Civic 11th: Not For China Spec
2 PCS/SET
Adjustable - Camber -1.5°~+0.5°
M12 Ball Stud
* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only
2 PCS/SET
Adjustable - Camber -1.5°~+0.5°
M12 Ball Stud
* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only
2 PCS/SET
OE Replacement - M12 Ball Stud
*RSX/Integra: For Base Model '02-06 & Type-S '02-04
2 PCS/SET
M12 Ball Stud
*RSX/Integra: For Base Model '02-06 & Type-S '02-04
2 PCS/SET
Range: 320-359 mm
Ball stud: M10
2 PCS/SET
Fit:
PEUGEOT 206/207/208 Front Side
Range: 320-359 mm
Ball stud: M10
2 PCS/SET
Fit:
PEUGEOT 206/207/208 Front Side
2 PCS/SET
*Suitable for Integra DC2 / Civic EG with DC2 sway bar conversion
Range: 320-359 mm
Ball stud: M10
2 PCS/SET
Fit:
PEUGEOT 206/207/208 Front Side
Range: 320-359 mm
Ball stud: M10
2 PCS/SET
Fit:
PEUGEOT 206/207/208 Front Side
Range: 280-319 mm
Ball stud: M10
2 PCS/SET
*Porsche 996/997: For C4/Turbo Front Side Use
Ball stud: M10
* Civic 8th: Not for Thailand/India/Indonesia Spec Cars
2 PCS/SET
Ball stud: M10
* Civic 8th: Not for Thailand/India/Indonesia Spec Cars
2 PCS/SET
Suitable For Lowered Cars
Length: 492 ± 3 mm (Shortened)
*Only compatible with Hardrace tie rod end #8144 & #8145
2 PCS/SET
OE Style
2 PCS/SET
For Electric Power Steering Use
· USDM SI & Hybrid
· JDM (except Type-R)
· Asia Spec 2.0L
25.4 mm
* 90° ball joint type end links required, or see #6480
* LCA with end link mounting holes required for non sway bar equipped cars, or see #6247
7 PCS/SET