Blog
Hardrace chassis reinforcement guide for Toyota Camry 9th XV80 / 8th XV70 / Lexus ES 7th XZ10
The Camry comes with independent MacPherson front and multi-link rear suspension, mounted on Toyota's TNGA platform that makes extensive use of high-strength steel to improve chassis rigidity, offering a smooth and comfortable ride, along with responsive handling. Fitting Hardrace control arms that features adjustable mechanism, reinforced body structures and hardened bushings / pillow ball bearings to the cars will help achieve better suspension rigidity, precise alignment and further improve handling performance.
Hardrace is now offering a series of suspension and chassis for the Camry 9th XV80 / 8th XV70 / ES 7th XZ10 to further improve its performance and driving pleasure.
14 items available for the Camry 9th XV80 / 8th XV70 / ES 7th XZ10:
ARM
Q0795 FRONT LOWER CONTROL ARM | Harden Rubber Equipped
The front lower control arms feature OE design with improved construction and materials. Made of ED coated and painted high quality stamped steels, these arms offer superior strength and durability. The equipped high quality harden rubber bushings provide greater handling response over the factory components.
. High-strength stamped steel construction
. ED coated and painted for the highest durability
. Premium quality bushings equipped
. Improve handling performance
. OE direct replacement
8884 REAR TOE KIT | Harden Rubber Equipped
Toe arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. It helps to raise straight line stability and road control. Toe arm made with high-strength steel alloys to offer high durability, strength and yet remain light-weight.
. ED process and painting for the highest durability
. Provides stability, increase steering response
. Direct bolt on designed
Q1340 REAR UPPER CAMBER KIT | Pillow Ball Equipped
Q1119 REAR UPPER CAMBER KIT | Harden Rubber Equipped
The camber kit allows fine adjustments to the rear end camber setting of the vehicle. It can either help improve cornering grip or get your car back to original alignment specs after lowering to prevent uneven tyre wear. The arms are made of stamped steel alloys to offer greatest strength and durability. The equipped pillow ball bearings/ Harden Rubber Equipped also provide more precise and solid handling response over the factory components.
. Offers camber adjustability to suit various driving conditions
. High-strength stamped steel construction
. Premium quality pillow ball joints equipped / Harden Rubber Equipped
. Improve handling performance
. OE direct fitment
BUSHING
Q0799 FRONT LOWER ARM BUSHING | Harden Rubber Equipped
Q1138REAR UPPER ARM BUSHING| Harden Rubber Equipped
Q0896 REAR LOWER ARM BUSHING| Harden Rubber Equipped
Harden rubber bushings are made of high strength and anti-crack rubber materials to offer solid handling response and resistance to unwanted suspension movement during hard acceleration, braking and cornering.
. Improve handling response
. OEM direct replacement
. Regular greasing not required
. No noise or squeaks
Q1452 FRONT LOWER ARM BUSHING-REAR | Pillow Ball Equipped
Q0891 REAR TRAILING ARM BUSHING| Pillow Ball Equipped
Pillow ball bushing provides excellent driver feedback, precise control and solid suspension feel. The bushing is made of precisely made high molecule plastic tube and specific steel alloy for superior durability and reliability. The Outer side utilizes TPV material anti-dust boot, 100% resistant from dust, water and oil, extend the life of the bushing.
‧Excellent driver feedback
‧Increase steering response
‧High quality spherical joint bearing
‧Solid response
‧OEM direct replacement
ROLL CENTER BALL JOINT
Q1309 FRONT LOWER BALL JOINT
HARDRACE front lower ball joint replace your old ball joint to give you a more accurate feel with the steering.
. High quality ball joints with forged housings
. Improve steering response
. OE direct fitment
STABILIZER LINK
Q0402 REAR ADJ. STABILIZER LINK | Pillow Ball Equipped RANGE: -10mm to +10mm
HARDRACE adjustable stabilizer link with adjustable ball joint always level to horizontal to match ride height of vehicle. Precision assembly production enables spheroid, self-lubricating plastic bearing and bracket has a tight joint, providing a high quality and longer life . More direct energy transfer and feel
. Constructed of high-strength steel alloys that offer durability
. Manufactured to match OE fit
. Offer you adjustability for setting up the suspension
8793-260 ADJ. STABILIZER LINK Ball stud: M12 Range: 243-282 mm
The essential for getting connected! HARDRACE adjustable stabilizer links allow you to fine tune the position your sway bar for optimum handling. The adj. stabilizer link manufactured from high tensile steel with tight ball joints and rubber boots for superior strength and rigidity to extend its life. An absolute must for any lowered vehicle.
. Adjustable sway bar end links
. Self-lubricating plastic bearing and bracket
. More direct energy transfer and feel
. Improves handling performance
. Perfect for lowered vehicles
SWAY BAR
Q1296 FRONT SWAY BAR 28 mm
Q0584 REAR SWAY BAR 28mm
Sway Bar affects handling and the car's oversteer and understeer characteristic. It ties the suspension arms together across the front or rear end and keeps your car flat in turns instead of leaning over to one side, offering better stability and handling response especially at high speeds and cornerings.
. Designed for OE direct replacement
. Hollow internal structure
. Heat treated
. Correction of under or oversteer
. Improve handling performance and stability
