Product Search

Pillow Ball Equipped
CNC Aluminum Arm
2 PCS/SET

Camber kit
Pillow Ball Equipped
2 PCS/SET

Camber Kit
Harden Rubber Equipped
2 PCS/SET

Camber Kit
Bushings not included
2 PCS/SET

OE Style
Pillow Ball Equipped
2PCS/SET

OE Style
Harden Rubber Equipped
2 PCS/SET

Tubular Type
Pillow Ball Equipped
Stab. Link Included
* #7214 Compatible
6 PCS/SET

Tubular Type
Harden Rubber Equipped
Stab. Link Included
* #7214 Compatible
6 PCS/SET

OE Style
Pillow Ball Equipped
2PCS/SET

OE Style
Pillow Ball Equipped
2 PCS/SET

OE Style
Harden Rubber Equipped
2 PCS/SET

OE Style
Harden Rubber Equipped
2 PCS/SET

OE Style
2 PCS/SET

*CIVIC 6th : For USDM EJ6/7/8 use

Caster Adjustment Range: +0°~2.5°
* Civic EK '96-00: For USDM EJ6/7/8 Use Only
32 PCS/SET

Camber Kit
Pillow Ball Equipped
2 PCS/SET

*For DA 90-93 Use

Camber Kit
Adjustment Range: -4 degrees plus
Harden Rubber Equipped
2 PCS/SET

*For Extreme Camber Use Only

Camber Kit
Harden Rubber Equipped
2 PCS/SET

Toe Kit
Pillow Ball Equipped
2 PCS/SET

Toe Kit
Harden Rubber Equipped
2 PCS/SET

Aluminum / USDM
Pillow Ball Equipped
Shock Bushing: 40 mm
2 PCS/SET

Aluminum / USDM
Pillow Ball Equipped
Shock Bushing: 50 mm
2 PCS/SET

OE Style / USDM
Harden Rubber Equipped
Shock Bushing: 40mm
2 PCS/SET

Harden Rubber Equipped
2 PCS/SET
Aluminum body
Shock Bushing: 40 mm

Alumunum
25mm Shorter Design
2 PCS/SET

* Extreme Low Use
* 0.5kg Lighter than OE per side
* Not compatible with RC Ball Joints
* Civic/CR-X EF: For EG shock conversion only

2 PCS/SET

For LHD & RHD Cars
1 PCS/SET

7 PCS/SET

5 PCS/SET

Direct bolt-on Parts is COMPATIBLE
with these anti rear sway bars:
* HARDRACE 25.4mm hollow bar
* Mugen 26mm swaybar
* OEM Integra/Civic Type R 22-23mm sway bar

Harden Rubber Equipped
26 PCS/SET
For USDM Use

Pillow Ball Equipped. 6 PCS/SET
No Press Necessary

Pillow Ball Equipped
4 PCS/SET

Harden Rubber Equipped
CAMBER-0.5°, CASTER+0.5°
6 PCS/SET

Harden Rubber Equipped
Repair Kit 6 PCS/SET

Harden Rubber Equipped
4 PCS/SET

Pillow Ball Equipped. 4 PCS/SET

Pillow Ball Equipped
2 PCS/SET

Pillow Ball Equipped
2 PCS/SET
Offset Bushing
Increase Caster
* Not compatible with tubular type arms

Harden Rubber Equipped
6 PCS/SET
Including Compliance Bushing

Harden Rubber Equipped
4 PCS/SET
Offset Function
Camber + Caster Adjustment

Harden Rubber Equipped
2 PCS/SET
Offset Bushing
Increase Caster
* Not compatible with tubular type arms

Harden Rubber Equipped
2 PCS/SET

Pillow Ball Equipped
4 PCS/SET

Harden Rubber Equipped
4 PCS/SET
For DA 90-93 Use

Pillow Ball Equipped
2 PCS/SET

Harden Rubber Equipped
2 PCS/SET

Harden Rubber Equipped
4 PCS/SET

6 PCS/SET
Pillow Ball Equipped

* For USDM DC2 None Type-R Only

Harden Rubber Equipped
USDM 50mm
6 PCS/SET

3 bushings type rear LCA only.
This kit will NOT work on Type R models, or models with Type R Rear lower arms.

2 PCS/SET
18 mm

2 PCS/SET
24mm, SO/NON Type-R Used

2 PCS/SET
USDM Type-R, Front-24mm

Rear - 19 mm
2 PCS/SET

USDM Type-R 22 mm
2 PCS/SET

2 PCS/SET
Rear 15 mm

Pillow Ball Equipped
Oilless Bearing
* EK: For USDM EJ6/7/8 Use Only
* EK: Not For SI EM1 Use
2 PCS/SET

4 PCS/SET
For EG/EK/DC2 SOHC Use

4 PCS/SET
* FOR CIVIC EG/EK/DC2
* FOR DOHC USE

5 PCS/SET
For DOHC Use

4 PCS/SET

For USDM Use
5 PCS/SET

5 PCS/SET
For MT B16/B18 Use
Street Version

5 PCS/SET
For MT B16/B18 Use
Race Version

1 PCS/SET
(RACE VERSION)

1 PCS/SET
For MT Use
Right Side

3 MOUNTS/SET

* For Accord '03-07/ TSX '04-08 Manual Transmission
3 MOUNTS/SET

M12 x P 1.5
For Civic EF/EG/EK Use
20 PCS/SET

For 36mm (Nut Size) Axle Use
PCD: 4Hx100 With Extended Wheel Studs
Bearing ID=43mm/OD=79mm (Made in Japan)
4PCS/SET

*Civic EG/EK:
-Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors).
-Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

For 36mm (Nut Size) Axle Use
PCD: 4Hx100 With Extended Wheel Studs
2PCS/SET

*Civic EG/EK:
-Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors).
-Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

Made in Japan
ID=43mm/OD=79mm
2 PCS/SET

*Civic EG/EK: Fits 79mm knuckles Only

1 PCS/SET

2 PCS/SET
OE Style

* For Integra DC 94-97 Use

2 PCS/SET

2 PCS/SET
Upside Down Installation
*For Track & More Than 2-inch lowered Use Only

2 PCS/SET
OE Style

OE Replacement
OD=35.5mm
2 PCS/SET

OE Replacement
2 PCS/SET

15mm Extended
2 PCS/SET

5 PCS/SET
HARDRACE: 25.4 mm
OE: 18 mm
* EG TYPE-R ONLY
* DC2 TYPE-R ONLY

2 PCS/SET

*Suitable for Integra DC2 / Civic EG with DC2 sway bar conversion

2 PCS/SET

2 PCS/SET
Steel Body

*For OE sway bar use

2 PCS/SET
Lowered car version